Top Provider Of Mixing Equipment & Solution In The World
mc 30 bitumen application equipment

MC-30 - Best Asphalt Manufacturers and Asphalt Suppliers

Product Description. Description: Cutback MC-30 containing minimum 50% Bitumen, is commonly used as a Prime Coating. It is homogeneous and will not foam (as observed visually) when heated to application temperature.

SABIT MC - 30 - SaudiBitumen industries

Uses & Application: SABIT MC - 30, suitable for use in the construc-tion & maintenance of pavement as designated in ASTM D2399, it is ideal for prime coat, tight surfaces. SABIT MC - 30 is applied to asphalt or granular surfaces using truck mounted spray equipment. Coverage: Priming is accomplished by spraying 0.65 - 1.75

Chemix » MC 30

Cutback bitumens are used extensively in sprayed sealing applications, particularly in cooler weather where they provide improved initial stone retention due to their lower viscosity. Typically, a single application of the appropriate cutback bitumen is sprayed onto the primed pavement onto which aggregate is laid.

Cutback Bitumen, Iran Cutback Bitumen, RC - MC - SC, 30, 70 ...

Cutback bitumen is divided into three categories based on viscosity grade. Rapid-Curing – RC. RC cutback bitumen is manufactured by solving bitumen in gasoline, so evaporation occurs quickly and the bitumen is deposited. Medium-Curing – MC . MC cutback bitumen is manufactured by solving bitumen in kerosene, so evaporates more slowly than ...

Cutback bitumen MC-30

Cutback bitumen MC-30 General information of cutback bitumen MC-30. In many places, cutback asphalt use is restricted to patching materials for use in cold weather cutback MC-30 is medium curing (MC) cut-back asphalt consisting of penetration grade asphalt cement and diluent or cutter of medium volatility.

MC 30 – Bituco

General description of cutback asphalt MC 30 Cutback bitumen MC30 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to reduce (or cutback) the viscosity of the bitumen.

MC-30; MC-70 - Russell Standard

MC-30; MC-70 1.2. Intended Use of the Product Use of the substance/mixture: Dust Suppressant 1.3. Name, Address, and Telephone of the Responsible Party Company Russell Standard / Hammaker East 285 Kappa Drive Suite 300 Pittsburgh, PA 15238 T: (800) 323-3053 www.russellstandard.com 1.4. Emergency Telephone Number Emergency Number

Cutback Bitumen MC30, mc250, mc3000, mc70, mc800, bitumen ...

Cutback bitumen also is ideal for prime coat and cold applied. Because easy uses and no need to thinning and heating. Packing of cutback bitumen MC-30. Packing of cutback bitumen MC-30 is in new thick steel drum. This drums are on pallet to prevent any leak inside of container also bulk in bitutainer and tanker. Guaranty/warranty of cutback ...

MC-30, MC-70, MC-250, MC-800, MC-3000

MC-30, MC-70, MC-250, MC-800, MC-3000 8. Exposure Controls/Personal Protection Engineering Controls Local or general exhaust required if in an enclosed area to remain below the TLV. If work place exposure limits are exceeded, a NIOSH/MSHA approved air supplied respirator is advised in the absence of proper environmental engineering controls.

MSDS of cutback bitumen MC 30 MC 70 MC 250 MC800 AND MC 3000

1. identification of substances / preparation and supplier . product name: mc 30 mc 70 mc 250 mc800 and mc 3000 cutback bitumen . product type: bituminous prime for road construction